Brand New! Great Holiday Gift!!!
"Twisted Cripple EDC"
* Perfect for working around the house *
* Sized right for any task, at home or in the woods *
* Wear it under your fishing or bird hunting vest *
* Useful on the job where repeated use or quick access is needed *
* Why use a utility knife when you can have a custom? *
* O1 Tool Steel holds an edge forever, but is easy to resharpen if necessary *
Only $125 Shipped USPS Priority Mail
in The Continental U.S.

The "Twisted Cripple EDC" is an Every Day Carry Necker priced right for the working man, for early holiday shopping, or for any reason you can come up with because you want a new knife. This limited run is a collaboration with my apprentice, CJ Powell, as we wanted to come up with something that would be affordable yet retain the Jarrett Knives reputation for quality - and after the first one was profiled and ground, we liked it so much that we kept going. We are limiting the run to a maximum of 100.

Each knife is sequentially numbered on the right side, and on the other it is marked with “JK” for the Jarrett Knives shop . And in case anyone is wondering, unlike other makers bigger "runs" of similar knives, these are not cut out by water jet or CNC by a third party. They are all individually made, one at a time. All work was done strictly by hand in my shop including heat treating.

The first 15 are gone!
Drop me a note to be put on the short waiting list. Next run is 01/2010 for delivery in mid-January
Pre-orders being taken now for the next run of 20 pieces - Click here



The first run of 15 pieces are available here on the website and on Bladeforums. Buy now to insure you get a low number.

* Hand Made - No Water Jet or CNC *



They are approximately 6" in OAL with a blade of 2 3/8"

* Sequentially Numbered for Collectors *



We used Black Linen Micarta for the handles and left them "Grippy" for use even when wet.

* Only 100 in the series and then it's retired! *



416 Stainless steel pins and thong hole tubing

* Get yours Now while they last *



My choice of O1 tool steel rather than stainless for a quality EDC is for edge retention which to me is wear resistance, ease of sharpening in the field and edge stability combined. These EDC's are laser sharp – that I guarantee.

Sheath: : Concealex/Kydex; Black, with 27” Black Paracord neck lanyard and either a glow in the dark or whistle cord end closure. There is a mix so specify which you prefer and I'll fill orders until one or the other run out. The sheaths are finished so if you want a specific number, i.e. the lowest available number in the run, then you will get whichever cord end is on that sheath.



The first run of 15 pieces are available here on the website and on Bladeforums. Buy now to insure you get a low number.

Handle is contoured and feels great in any sized hand.


Return to Gallery